|
|
|
(4)
These are quality porcelain insulators smoothy glazed. Heavy nickel plated brass hardware used. Cushion washers supplied.
|
|
|
|
|
|
|
(4)
Porcelain glazed to prevent moisture absorption. All have long leakage path — small cross section strength under continuous tension.
|
|
|
|
|
|
|
(3)
These numbers have twice the leakage path of the straight type due to the increased surface area. Brass nickel plated hardware and cushion washers supplied.
|
|
|
|
|
|
|
(4)
Feedthrus are supplied with tops and bottoms for chassis, panel, shields, rack mounting. No hardware included. Made of L5 glazed Steatite.
|
|
|
|
|
|
|
(2)
Sections are each 2 3/4" high hi vitrified porcelain glazed. Comes thru with 2 additional bushings 1/4" and 1/2" long, permitting complete insulation of the threaded rod of any length in multiples of 1/4". Complete with brass nickel plated hardware, and cushion washers. Lead and cushion washers permit a water tight seal.
|
|
|
|
|
|
|
(37)
These threaded Steatite pillars are made of L5 glazed Steatite with threaded holes on both sides. One hole is for mounting. Meets Jan-I-8 & Jan-I-10 Specs
|
|
|
|
|
|
|
(3)
Made of hi tensile strength, low absorption ceramic, fully glazed corrugated surface. Provides longer leakage path. Drawn metal bases.
|
|
|
|
|
|
|
(4)
Steatite cones have smooth white glaze. Comes complete with brass nickel plated screws and cushion washers.
|
|
|
|
|
|
|
(3)
Suitable for mobile and aircraft or guy wire application. Compression type strain insulators. Nos. 10-73, 10-74 made of white glazed low absorption porcelain. No. 10-72 made of wet process porcelain.
|
|
|
|
|
|
|
(3)
Made of highly vitrified- low absorption- hi tensile strength porcelain, with white glaze overall.
|
|
|
|
|
|
|
(7)
Suitable for buss and heavy lines insulation. Beads follow bends and curves because of ball and socket style interlocks. Made of Steatite.
|
|
|
|
|
|
|
Hex head molded nylon with spade lug. Brass nickel plated.
|
|
|
|
|
|
|
(2)
Molded nylon body. Accepts tip plug, spade lug, banana plug, wire, alligator clip and direct solder connection. Has molded-in brass inserts in head and washer. Rated at 30 amps. AC Capacitance 5.0 mmfd. Banana plug receptacle .161" I.D. Head non-removable from stud and washer completely insulates post from panel.
|
|
|
|
|
|
|
(2)
Captive Nylon Hex Head or Fluted Head. Brass nickel plated. Turret terminals - wrap around. 15 amp rating AC. Mounts in 3/4" centers. Available in red, black, or combinations. Specify.
|
|
|
|
|
|
|
(2)
Molded nylon captive head. Brass, nickel plated stud and nuts. Rated at 15 amps. AC, capacitance 3.0 PF. Mounts in 1/4" round hole in panels up to 1/8" thick.
|
|
|
|
|
|
|
(5)
Mates with any standard banana jack. Plastic 1 handle.
|
|
|
|
|
|
|
(2)
Spring is four leaf phosphor bronze, or beryllium copper. Wire can be soldered directly into plug. Molded plastic handle. Fits standard banana jacks.
|
|
|
|
|
|
|
(6)
Fits all standard banana jacks. Plug bodies are hex, brass nickel plated.
|
|
|
|
|
|
|
Brass silver plated body. Spring is four leaf phosphor bronze, silver plated.
|
|
|
|
|
|
|
Fits any standard phone tip jack. Brass, nickel plated body. Solderless connection for wire which fits thru body of tip and secured under knurled nut. Shock resistant plastic handle.
|
|
|
|
|
|
|
(2)
Brass nickel plated. Both fit all standard phone tip jacks. Slipping the wire thru body of tip, then wrapping same around screw. Is tightened by knurled collar. Solderless phone tip uninsulated.
|
|
|
|
|
|
|
(2)
Body is brass, nickel plated with molded plastic handle. Solderless connection for wire fits thru handle and plug body and wraps under knurled nut.
|
|
|
|
|
|
|
(2)
Brass nickel plated. Fit standard phone tip jacks. Wire is fastened by slipping thru body of tip, then wrapping around screw and tightening by knurled collar.
|
|
|
|
|
|
|
(2)
Brass nickel plated plug, chuck is removable for replacement of broken needles. Sharp needle pierces insulation or corrosion for testing purposes. Molded plastic handle.
|
|
|
|
|
|
|
(2)
For round and flat modular cable. Contacts are gold plated, body is clear.
|
|
|
|
|
|
|
For repairing or replacing plugs on 4 conductor modular cables.
|
|
|
|
|
|
|
(2)
RCA Type- useful with record players, recording equipment. Extra large hole in cap .175" for coaxial cable. RCA type Extra large .175" hole in cap.
|
|
|
|
|
|
|
(2)
RCA type phono plug.
|
|
|
|
|
|
|
(2)
Nickel plated 1/8" tube pin extends from split brass shell cadmium plated.
|
|
|
|
|
|
|
(4)
Fits all standard phone jacks. Body, tip, sleeve is brass, nickel plated. 5 amp. AC rating, continuous duty. 750V. 60 cycle AC. Red, Black.
|
|
|
|
|
|
|
(4)
Shielded phone plug. Barrel-brass, nickel plated with tubular insulator.
|
|
|
|
|
|
|
(2)
Insulated, molded plastic handle, brass nickel plated body, solder terminals: 5 amp. rating continuous duty.
|
|
|
|
|
|
|
Body is brass nickel plated. Mounts in 5/16" hole in panels up to 3/8" thick. Comes thru with hex nut, tinned copper lug, lockwasher, fiber washer. Takes all standard banana plugs. Jack body is recessed for tight contact. Molded plastic head.
|
|
|
|
|
|
|
Hexed brass nickel plated hex nut and tinned copper lug. Has recessed head. Mounts in 1/4" hole in panels up to 5/16" thick. Fits all standard banana plugs. Rated 15 Amps AC. Mates with 19-46, 19-44, 19-53, 19-04, 17-40, 17-41
|
|
|
|
|
|
|
Will take senior phone tips or standard banana plugs. Body is brass, nickel plated. Mounts in 5/16" hole in panels up to 1/2" thick. Springs are phosphor bronze. Comes thru with hex nut and fiber washer.
|
|
|
|
|
|
|
Fits all standard phone tips. Brass nickel plated body. Phosphor bronze spring provides positive contact. Comes thru complete with hex nut and fiber washer. Molded plastic head.
|
|
|
|
|
|
|
Female for our Nos. 9-148, 9-147. Positive grip, single prong 1/16" bakelite, 11/16" mounting center.
|
|
|
|
|
|
|
Small, compact 11/16" mounting centers.
|
|
|
|
|
|
|
(4)
Used on recording equipment, phonographs, etc. Use for 2, 3, or 4 inputs.
|
|
|
|
|
|
|
Where space is at a premium. Mounts in 19/64" hole. Rivets and grounds to chassis.
|
|
|
|
|
|
|
Female for our Nos. 9-148, 9-147. Positive grip, single prong 1/16" bakelite, 11/16" mounting center.
|
|
|
|
|
|
|
(4)
Body is brass nickel plated. Designed for long life. Nickel Silver alloy spring. Rated 10 amp. AC continuous duty. Mounts in 3/8" hole in panels up to 5/32" thick. Mates with 19-81, 19-82. etc.
|
|
|
|
|
|
|
(2)
Brass, nickel plated, mounts in 1/4" hole in panels up to 1/8" thick. Mates with 19-130, 19-131
|
|
|
|
|
|
|
(2)
Molded plastic handle lug is steel. Rated at 25 amps. AC. Rear barrel accommodates banana plugs.
|
|
|
|
|
|
|
(16)
|
|
|
|
|
|
|
(23)
Terminal lugs are lockwasher types, brass, and hot tinned.
|
|
|
|
|
|
|
(38)
2 to 8 lugs. Standard and miniature strips for solder connection. Standard type- lugs are on 3/8" centers with .140" diameter mounting holes. 1/16" (.062") thick XP bakelite by 3/8" wide. Mounti in .140" diameter ID holes for #6 screw. Miniature type- lugs are steel cadmium platd. Mount in .96 ID hole with 3/32" rivet or #3 screw.
|
|
|
|
|
|
|
(7)
Terminals made of brass hot tinned, mounted on X.P. Bakelite 5/8" wide x 1/14" thick, spaced 7/16" centers. Screws are 6-32" x 3/8" steel, cadmium plated. Additional constructions to order.
|
|
|
|
|
|
|
(15)
Threaded spacers for 4-40, 6-32 and 8-32 application. Plated.
|
|
|
|
|
|
|
(30)
Suitable for raising sub panels, condensers, transformers, chassis, etc. Bushings hole accommodates a No. 4, No. 6 or No. 8 Screw. 1/4" OD Round Plated Brass. Hole not threaded.
|
|
|
|
|
|
|
(30)
Brass plated. Hole for #4, #6, or #8 screw. Not threaded.
|
|
|
|
|
|
|
(15)
Brass plated. 1/4" Hex
|
|
|
|
|
|
|
(15)
Fiber material per MIL-F-1148A, Grade CH. 1/4" OD.
|
|
|
|
|
|
|
(30)
These versatile nylon spacers may also be used as bushings, rollers and glides in various electrical/electronic applications. They resist common solvents, alkalis, diluted acids. These spacers are not threaded.
|
|
|
|
|
|
|
(15)
These versatile nylon spacers may also be used as bushings, rollers and glides in various electrical/electronic applications. They resist common solvents, alkalis, diluted acids. They are 1/4" O.D. Round
|
|
|
|
|
|
|
(15)
These versatile nylon spacers may also be used as bushings in various electronic applications. They resist common solvents, alkalis, diluted acids. 1/4" Hex. 3/4" and 1" length items are tapped 3/8". Alll others are fully tapped.
|
|
|
|
|
|
|
(15)
1/4" Hex Male & Female threads same for each item.
|
|
|
|
|
|
|
(5)
Material: 6/6 Nylon, MIL-M-20693B. "A" Type 1, GDE 2 UL 94-V2. Type 1, ASTM D789-66 Threaded Length 1/2". Color: Natural.
|
|
|
|
|
|
|
(60)
These Nylon Fastenings have outstanding insulation specs, hi-resistance to heat, shock, vibration, chemical. They are light in weight, superior torque strength. Corrosion resistant, non-magnetic. Continuous service temperature to 300°F.
|
|
|
|
|
|
|
(6)
Meets MIL-P-20693A. Color: Natural.
|
|
|
|
|
|
|
(4)
Brass nickel plated flat washers.
|
|
|
|
|
|
|
(6)
Nylon flat washers are available in natural.
|
|
|
|
|
|
|
(11)
NEMA Standard ASTM Spec. D-710.
|
|
|
|
|
|
|
(10)
Natural Nylon per MIL-P-20693A. Color: Natural.
|
|
|
|
|
|
|
(11)
Fibre material per NEMA standard and ASTM Spec. D-710
|
|
|
|
|
|
|
(5)
Wide flanges isolates screw from mounting surface. Has hi- tensile and torque strength. Color: Natural. MIL-P-20693A
|
|
|
|
|
|
|
(2)
Brass nickel plated. 14-370C is Miniature
|
|
|
|
|
|
|
(7)
These rods are used on our insulator assemblies.
|
|
|
|
|
|
|
(4)
Black and red kinkless test lead wire. Solderless product. 4" handles.
|
|
|
|
|
|
|
(8)
Black and red #20 AWG kinkless test lead wire with steel plated alligator clips at each end. Available insulated and uninsulated.
|
|
|
|
|
|
|
(5)
Steel, cadmium plated for 5 amp continuous duty. 1/2" jaw opening. Jaws match accurately, grips securely. Accepts standard banana plugs. Wire fastening available by solder type or screw type. Handle insulated or insulated. Insulating boot in black or red.
|